Balochistan University of Engineering & Technology, Khuzdar
Help Desk
Balochistan University of Engineering & Technology, Khuzdar
Help Desk

Bachelor of Engineering (Electronic)

Bachelor of Engineering (Electronic)

The bachelor of engineering (electronic) is a four-year degree program based on the standard courses and practical work regulated by the Higher Education Commission (HEC) and Pakistan Engineering Council (PEC). A student opting for a bachelor’s degree has to complete the requisite number of credit hours as laid down in HEC regulations. A thesis based on original research work will have to be submitted and defended as per the procedure of HEC. The duration of the degree depends on the performance of the student and the nature of the research problem.

Program Objectives

  • PEO-1: Graduates would be able to use their knowledge and analytical skills in development of their career and profession.

    PEO-2: Graduates would be able to contribute to the development of the society based on their expertise in technical knowledge and educational experience.

    PEO-3: Graduates would be able to show leadership and excellence in leading the society and the mankind.

Eligibility Criteria

  • Minimum 60% aggregate marks in HSSC OR equivalent exams
  • Mathematics is prerequisite

Program and Course Credit Hours Distribution

0
Program Years
0
Semesters
0
Credit Hours

Courses

  • First Semester
  • Second Semester
  • Third Semester
  • Fourth Semester
  • Fifth Semester
  • Sixth Semester
  • Seventh Semester
  • Eighth Semester
  • Elective Courses

First Semester

 

Sr. No. Code Course Title Credit Hours
1 HS-111 Technical Communication Skills 2
2  HS-112 Islamic Studies 2
3 NS-113 Applied Mathematics-I 3
4 EE-114 Electricity and Magnetism 4
5 CS-115 Introduction to Computers Technology 4
6 EE-116 Electronics Workshop Practice 1

 

Second Semester

Sr. No Code Course Title Credit Hours
1  HS- 121 Technical Report Writing 2
2  HS-122 Pakistan Studies  2
3  NS-123 Applied Mathematics-II 3
4  EE-124 Electrical Technology – I 4
5  CS-125 Computer Programming 4
6  EE-126 Digital Logic Technology 4

 

Third Semester

Sr. No. Code Course Title Credit Hours
1 EE-211 Electrical Machines 4
2 EE-212 PCB Design and Fabrication workshop 1
3 EE-213 Electrical Technology – II 4
4 EE-214 Instrumentation and Measurements  4
5 EE-215 Electrical Circuit Analysis 4

 

Fourth Semester

Sr. No. Code Course Title Credit Hours
1 EE-221 Electronic Devices & Technology 4
2 EE-222 Communication Systems and Techniques 4
3 EE-223 Control Technology 4
4 EE-224 Electromagnetic Field Theory 3
5 EE-225 Amplifier & Oscillators 4

 

Sr. No. Code Course Title Credit Hours
1 EE-311 Power Electronics 4
2 EE-312 Probability Methods in Engineering 3
3 EE313 Industrial Drives 4
4 EE314 VLSI Technology 4
5 EE315 Applied Antenna & wave Propagation 4

Sixth Semester

Sr. No. Code Course Title Credit Hours
1 EE-321 Industrial Electronics Applications 4
2 EE-322 Professional Ethics 2
3 EE-323 Digital Signal Processing  4
4 EE-324 Integrated Electronic 4
5 EE-325 FPGA Based Systems 4

Seventh Semester

Sr. No. Code Course Title Credit Hours
1 NS-411 Engineering Economics 2
2 EE-412 Analog & Digital Communications 4
3 EE-413 Renewable Energy Technology 3
4 CS-414 Data Communication & Networking 4
5 EE-499A Electronic Engineering Project 3

Eighth Semester

Sr. No. Code Course Title Credit Hours
1 EE-421 Elective I 4
2 EE-422 Elective II 4

Elective Courses

Course Credit Hr
Medical Imaging  (3+1)
Digital System Design  (3+1)
Embedded System Design  (3+1)
Computer Architecture  (3+1
Microcomputer Systems  (3+1
Hardware Software Co-design Techniques  (3+0)
Linear Controls System  (3+1)
Digital Control Systems  (3+1)
Wireless Sensor Networks  (3+0)
Fuzzy Logic and Simulation  (3+0)
Digital Image Processing  (3+0)
Laser and Fiber Optics  (3+0)
Numerical Methods  (3+0)